Specification :

Free UPS Ground shipping in the lower 48 states of USA
Weighing Capacity

410 g
Maximum Display

410.084 g
Resolution

0.001 g
Repeatability/ Std. Dev.

0.001 g
Linearity

± 0.002 g
Tare Range

To capacity by subtraction
Stabilization time ( Typical in FAST)

Approximately 1 second. Review the test data on response time
Sensitivity Drift

± 2ppm / ° C ( When automatic self calibration is not used)
Weigh Modes

g, oz, lb, lb: oz, ozt, ct, mm, dwt, GN, TL, t, MS, PC, % , and DS
Operating Temperature

5° C~ 40° C / 41° F~ 104° F RH less than 85%
Sensing Method

Super Hybrid Sensor ( SHS)
Display Type

Vacuum Florescent Display ( VFD)
Display Refresh

5 times/ s, 10 times/ s or automatic ( Selectable)
Pan Size
128 x 128 mm / 5 x 5 inches
Counting mode Min unit mass
0.001 g
Number of sample
10, 25, 50 or 100 pieces
Percent mode Min 100% reference mass
0.100 g
Min 100% display
0.01% , 0.1% , 1% ( Depends on the reference mass stored)
Breeze Break Dimensions
mm
Internal: 145( W) x 145 ( D) x 90( H) mm ( standard Plastic Breeze Break)
inch
Internal: 5.7( W) x 5.7( D) x 3.6( H) in ( standard Plastic Breeze Break)
Breeze Break Dimensions mm
Internal: 163( W) x 195 ( D) x 208( H) mm ( with optional GX-10 Glass Breeze Break)
inch
Internal: 6.4( W) x 7.7( D) x 8.2( H) in ( with optional GX-10 Glass Breeze Break)
Standard Interface
RS-232c with Windows Communication Tool ( WinCT)
External calibration weights
( optional cal mass for external only)
400g ASTM Class 1
300g ASTM Class 1
200g ASTM Class 1
Calibration
Motorized Internal Calibration
External Dimensions
210( W) x 317( D) x 86( H)
Power ( AC Adapter)
100, 120, 220, 240 VAC ( AC adapter) 50/ 60 Hz All balances shipped with 120V AC Adapter. Other voltages add $ 25.00
Net Weight ( Approx.)
4.6 kg / 10.1 lb
Standard Accessories

Manual, AC Adapter, WinCT
Optional Accessories
RS-232C Cable, SW-128 Foot Switch, Density Determination Kit, Cover, All Glass Draft Shield, Printer